- Water

- Gas

- Electric

- AMR

- Conservation

  - Water
- Gas
- Electricity

 

 

 

Visit our Submeter Store for orders of 10 or less

For orders of 10 or more contact Sales or Request a Quote




 

Master Meter Flexible Axis Meter (FAM)

The next time you're faced with a challenging residential installation, check out the Master Meter flexible axis meter (FAM). FAM flow tubes can be installed horizontally, vertically, or any angle in between. No matter where it ends up, the FAM measuring chamber remains horizontal for accurate -- and quiet -- operation. It can also be positioned so it is always facing up for easy reading.

   
 

Master Meter 5/8", 3/4", 1" Classic Multi-Jet

Using superior measurement technology, these meters represent the perfect balance between accuracy, cost, and longevity. With sensitivity to measure water flowing as low as 1/8 gallon per minute and accuracy unaffected by common particulates and build-up that would freeze other types, you can count on a Multi-Jet.

   
 

Master Meter 5/8", 3/4", & 1" BLMJ - Bottom Load Multi-jet

Master Meter 5/8", 3/4", and 1" meters are in operation today using superior measurement technology. These meters represent the perfect balance between accuracy, cost and longevity with sensitivity to measure water flowing as low as 1/8 gallon per minute and accuracy unaffected by common particulates and build-up that would freeze other meters.
   
 

Master Meter Hot Water Meters - 5/8" to 2"

Velocity-type meter meeting or exceeding the performance requirements of AWWA Standard C-708. Water, evenly distributed through multiple inlet ports, flows past an impeller in the measuring chamber, creating an impeller velocity directly proportional to water flow rate.

   
 

Master Meter 1.5" - 2" Intermediate Multi-jets

Available in bolt-flange or threaded designs, our 1-1/2" and 2" multi-jet meters are a great choice for a wide range of applications. With accuracy that extends into the lower flows that a turbine can't handle, compact size and multi-jet performance, they are hard to beat. Modular Register design means easy upgrades to newer reading technologies, without the cost of changing out the whole meter.

   
 

Master Meter Electrical Output Registers for Multi-Jet Meters

Electrical output registers compatible with Master Meter 5/8" to 2" Multi-jet Cold or Hot Water Meters and 2" to 12" Turbine Meters providing single or double contact closure corresponding to defined volume increments.

   
     
 

Neptune T-10 METER 5/8”, 3/4”, and 1”

Every T-10 5/8", 3/4", and 1" water meter meets or exceeds the latest AWWA C700 Standard. Its nutating disc, positive displacement principle is time-proven for accuracy and dependability since 1892, ensuring maximum utility revenue.

   
 

Neptune Aquity Meter

The Aquity meter is a shorter lay length water meter for use in submetering applications where the property owner of multi-family properties can shift fixed water costs to tenants. Every Aquity meter meets or exceeds the latest AWWA C700 Standard and is approved for use as a domestic cold water meter in legal sub-metering installations by the California Type Evaluation Program. Its nutating disc, positive displacement principle is time-proven for accuracy and dependability since 1892, ensuring maximum revenue.

   
     
 

Sensus SR-accuSTREAM Meters (5/8" through 1" sizes)

These magnetic drive positive displacement meters use an oscillating piston to provide superior sensitivity in measuring a wide range of flows for a variety of residential applications or similar service needs. The SRA meter design includes a high quality cast bronze maincase, dual inlet ports and streamlined flow pattern to provide lasting measurement accuracy and deliver years of dependable service. In addition, tamperproof features have been added by integrating a unique locking bonnet into the register assembly.

   
 

Sensus SR Meters (5/8" through 2" sizes)

These positive displacement magnetic drive Sealed Register (SR®) meters feature bronze maincases and a unique tamper-proof design that prevents unauthorized removal of the internally locked register. Available with your choice of standard read and encoder registers.

   
 

Sensus SR II Meters (5/8" through 1" sizes)

These magnetic drive positive displacement meters use an oscillating piston to provide superior sensitivity in measuring a wide range of flows for a variety of residential applications or similar service needs. The SR II® meter design includes a high quality cast bronze maincase, dual inlet ports and streamlined flow pattern to provide lasting measurement accuracy and deliver years of dependable service.

   
 

Sensus PMM Meters (5/8" through 2" sizes)

These meters feature a tamper resistant magnetic drive sealed register to eliminate fogging and have only one moving part exposed to water. PMM® Multi-Jets offer superior tolerance to sand and debris. They offer extreme low flow sensitivity and superior reliability over a range of flows. Their registers feature large, easy to read numbers, a full width sweep hand and low flow (leak) detector. All PMM meters meet or exceed AWWA Standard C708.

   
     
 

Elster Cold water meter - positive displacement

Elster AMCO Water's C700 oscillating piston type water meters are the most advanced design positive displacement meters available. Boasting dependability and engineering excellence, the C700 line carries the industry's longest and broadest product warranty, assuring your utility of unparalleled performance and the highest revenue.

   
 

Elster Single Jet

For connection to AMR systems, the S130 can be equipped with a dry contact reed switch pulser, rated at 4 watts, which requires power from an external source. The unit is to be wired in series with no regard to polarity.

For submetering applications the pulser interfaces to automatic meter reading equipment; for industrial applications meter pulser provides input to totalizing and process control equipment.

   
 

Elster Registers

The Elster AMCO absolute encoder interfaces to electronic and Automatic Meter Reading systems to reduce meter reading and customer service costs. Encoder reading increases efficiency by reducing reading time and eliminating human error. Encoder reading significantly improves meter reader safety by eliminating the need to enter residences or hazardous confined spaces to take readings.

   

     
 

Badger Disk Series Meters

The Recordall family of Disc meter in a Bronze Low Lead Alloy. The Low Lead Alloy (Trade Designation: MLP LL) meter complies with NSF/ANSI Standard 61 and carries the NSF-61 Mark on the housing. All components of the Low Lead Alloy meter, i.e., disc, chamber, housing, seals, etc., comprise the certified system.

   




     
   

Hersey Meters offers a complete line of Positive Displacement water meters in 5/8" through 2" sizes. The largest measuring chambers in the business allow these water meters to outperform their competition.

Rugged and durable bronze cases provide the Positive Displacement Meters, a solid base for years of unsurpassed service. With the basics covered, the only decision left to make is which of the Hersey reading systems you need. Whether it's the standard visual read register or the Translator Encoder register with any of the available Hersey radio read systems, you'll get the same great tamper protection and Hersey quality that's been available for over 140 years.

   
     
   

Wellspring Point-of-Use Water Meters

Wellspring designs and manufactures a family of submetering and control products which employ an open protocol 2-way radio that complies with IEEE 802.15.4 and ZigBee radio standards.

The Aqura (pronounced Ak-ur-a) submeter marries the Wellspring radio with microprocessor based algorithms and a precision flow sensor made by SIKA of Germany. SIKA has been designing and manufacturing laboratory temperature and flow sensors for over 100 years.

The SIKA turbine flow sensor includes an internal pump that cools and lubricates a sapphire thrust bearing, and two PEEK sleeve bearings. This patented high-tech bearing system allows the SIKA sensor to perform predictably and repeatably throughout its range from 0.25 to 8.0 gpm, meeting IAPMO, ASME, ANSI, AWWA and NIST accuracy standards. At typical residential system flow rates, pressure loss is under 4 psi.

Aqura submeters may be applied in any water line that experiences less than 8 gallons per minute of maximum flow, including the main line feed of most 1 and 1.5 bathroom apartments, hot water heaters, and appliances. If flow rates are expected to exceed 8 gpm, use of larger water meters and Wellspring Energy Monitors (one Monitor for every 4 meters) are recommended.

It is often necessary to meter hot and cold water separately, because existing plumbing systems lack a single line feed or single shut-off valve. This can be done with two flow sensors, and only one Aqura radio. If each apartment unit has a hot water heater, Wellspring recommends application of meters at the cold feed to the heater, at each toilet, and at the cold feed to the clothes washer. This approach (2 or 3 meters per unit) captures 90% of water use, missing only the cold water fed to the sinks and cold side of the tub/shower.

If both cold and hot water enter the apartment through shared riser pipes, metering of the tub, shower, toilet, kitchen hot and laundry are recommended (4 to 5 meters per unit). Metering of the cold-water feed to the kitchen, and either cold or hot in the bathroom lavatory capture very little usage. This point-of-use metering approach allows recovery of water AND domestic hot water energy use, which aggregate to a value that justifies the higher cost of multiple meters over a payback period that is usually less than 2 years.


 
Home   |   Services   |   Products   |   Markets   |   Conservation   |   Managers    Residents   |   About   |   Contact
residents managers